How do I handle dot patterns or moiré effects when scanning artwork from printed sources? Dot patterns, known as moire effects, appear when you scan artwork that was originally produced with 4-color process printing. The halftone … Read answer What margin should I leave between the scratch-off material and other design elements on scratch-off cards? On scratch-off cards, keep important text and graphics a safe distance inside the scratch panel so nothing critical sits right at the edge o… Read answer Do booklet covers require extra space for binding? Yes, booklet covers and inside pages should be laid out with the binding in mind. Content that sits too close to the spine or the trim edge … Read answer What are the specifications for trading cards with sequential numbering? Trading cards print at the standard trading card size of 2.5 by 3.5 inches. Sequential numbering is handled with variable data printing, whi… Read answer How accurate is the cutting on printed products with narrow borders? Commercial cutting is precise but not perfect, so every job has a small trimming tolerance. Narrow borders are the least forgiving because e… Read answer Why are my images not printing sharp, and what should I do? Blurry or soft prints usually come down to two things: low resolution and the wrong color mode. Screen images can look fine on a monitor but… Read answer What color specification should I use for printing-CMYK or Spot color? Both CMYK and spot color have a place, and the right choice depends on your artwork. CMYK is the standard for full-color printing, while spo… Read answer How long does it take for printed products to dry before cutting? Freshly printed sheets need a short drying and curing window before they can be safely cut, folded, or finished, so the ink sets fully and d… Read answer What are the typical volume-based price breaks for bulk custom printing orders? Bulk custom printing is priced in tiers, and the per-unit rate steps down as you cross into higher quantity brackets. There is no single uni… Read answer What is a file setup fee and when does it apply? A file setup fee covers the hands-on work needed to get artwork ready to print correctly. It is separate from the printing itself and only c… Read answer What is the difference between event badges and membership cards? Both event badges and membership cards are available at 4OVER4, and the main differences come down to thickness and finishing options. Featu… Read answer What color model is used for printing? 4OVER4 prints in CMYK color mode, so files prepared in CMYK reproduce most accurately. CMYK is the four-ink process used across professional… Read answer How are printed products oriented or positioned on the sheet? Products are laid out on the parent sheet for the best fit and yield, which keeps material use efficient and pricing reasonable. That defaul… Read answer How many images can be used in a lenticular print effect? A lenticular print can hold up to four flips, meaning up to four separate images that switch as the viewing angle changes. Flip effect: up t… Read answer Can bleeds be applied to printed materials? Yes, bleeds can be applied to your printed materials so color and images reach the trimmed edge cleanly. Exact bleed amounts vary by product… Read answer
Didn't find your answer?
Our team replies within 24 hours.
