SEG Backlit Displays

These displays do the heavy lifting on presentation. The fabric prints deep, even color that light passes cleanly through, the silicone edge hides the hardware for a frameless face, and the whole graphic packs down small for travel between events. Want to see how it sits next to the rest of the family? Browse every option on SEG Displays, or stay here and build yours from the choices below.

Pricing starts at $1,899 for a 10 ft SEG backlit display, printed in-house on 6oz fabric and built to your file. You can order from 1 to 10 units in a single job, and every order earns 4OVER4 loyalty coins you can apply at checkout for up to 14% off. Set your options below and the live configurator shows the exact price before you commit.

What Is a SEG Backlit Display

A SEG backlit display is a large-format light box that holds a printed fabric graphic in an illuminated frame. SEG stands for silicone edge graphic: a thin silicone strip sewn around the fabric seats into a groove on the frame, so the print sits flat and frameless. At 4OVER4 it prints on 6oz tension fabric in a 10 ft format, single-sided or double-sided, and lights up evenly from within.

Picture a booth wall that glows. A SEG backlit display is a fabric graphic stretched drum-tight inside a lit frame, so your artwork reads bright and even instead of flat under trade-show lighting. SEG means silicone edge graphic. A 10mm silicone strip is sewn around the edge of the print and pressed into a channel on the frame, which pulls the fabric taut and hides the hardware for a clean, seamless face.

4OVER4 prints the graphic in-house on 6oz tension fabric and builds it to your spec, so the display you receive matches the file you sent. Add double-sided printing and the same unit reads from both directions on the floor. If you want the same silicone-edge look without the backlighting, the SEG Displays cover that, and this backlit version is the one that lights up on its own.

What Material Is It Printed On

4OVER4 prints SEG backlit displays on 6oz tension fabric with a sewn-in 10mm silicone keder, the edge strip that locks the graphic into the frame. It is the single material for this product, chosen because it holds color under backlighting and stretches wrinkle-free. Every display is built at the 10 ft SEG size.

The graphic runs on 6oz tension fabric, a dye-friendly polyester that shows deep, even color when light passes through it from behind. Around every edge, a 10mm silicone keder is sewn in. That is the silicone strip that seats into the frame groove and pulls the fabric tight, so the finished face is flat, seamless, and free of the ripples you get with clip frames.

This is the one material 4OVER4 runs for the product, spec-built at the 10 ft SEG size, because it is the combination that survives repeated setup and teardown and still lights up clean show after show. The full spec, from the default size to file types and turnaround, is laid out below exactly the way the live configurator presents it.

Should You Print One Side or Two

SEG backlit displays print single-sided or double-sided at 4OVER4. Single-sided suits a display set against a wall, where only the front is seen. Double-sided prints both faces of the fabric, so a unit placed in an aisle or hung overhead reads from both directions. You pick the number of sides in the live configurator.

Single-sided is the default and the right call when the display backs up to a booth wall or a corner, since only the front ever faces traffic. Choose double-sided when the unit sits out in the open, in the middle of an aisle, splitting two halves of a stand, or hanging where people pass on both sides, so nobody sees a blank back. The fabric prints edge to edge either way, and the silicone keder finishes both faces cleanly. Set the number of sides in the configurator and the price updates with your pick.

How Much Does a SEG Backlit Display Cost

A SEG backlit display starts at $1,899 at 4OVER4, printed in-house and built to spec. You can order from 1 to 10 units in a single job, and every order earns 4OVER4 loyalty coins worth up to 14% off the order total. The live configurator shows the exact price once you set your options and turnaround.

The starting price is $1,899 for a 10 ft SEG backlit display, printed on 6oz fabric and built to your file. You can order anywhere from 1 to 10 units in one go, handy when you are outfitting more than one booth or keeping a spare graphic on hand. Double-sided printing and a faster turnaround adjust the total, and the configurator shows every change before you commit. Every order also earns 4OVER4 loyalty coins that you can apply at checkout for up to 14% off.

Already have your artwork sized to the 10 ft face? Skip the guesswork and download a press-ready blank instead. The blank SEG backlit display template is built at the real dimensions with the bleed and safe margin drawn in, so your design never crowds the edge that tucks into the frame. Drop your art in and upload.

How Fast Can You Get One

Standard production for a SEG backlit display at 4OVER4 is 3 business days, with 2-day, Next-Day and Same-Day rush available. Order by the daily cutoff and a same-day job ships that afternoon from the New York facility. You can also choose Straight To Production or a Free Online Proof before printing, and upload artwork as PDF, JPG, or PNG.

Standard turnaround is 3 business days, which keeps the price lowest. When a show sneaks up, you can move to 2-day, Next-Day, or Same-Day production, and order by the cutoff to have a same-day job leave the New York plant that afternoon. 99.8% of 4OVER4 orders arrive on time and 82% ship early, so a firm booth date is not a gamble. Need it in a hurry? Our Same Day Printing keeps you covered.

Before it prints, choose Straight To Production to save a step, or request a Free Online Proof to check your layout first. Upload your artwork as a print-ready PDF, JPG, or PNG.

How Does It Compare to the SEG Family

The backlit display is the premium pick when you want your graphic to light up on its own, but it is not the only move in the range. If you are weighing a lit popup, a non-backlit SEG frame, or just a replacement graphic, it helps to see the trade-off in plain numbers. The chart below lines up SEG backlit displays against their closest siblings, so you can compare the starting price on each before you choose. Then browse the SEG Backlit Popup Displays for a lit, packable version, the SEG Displays for the frame without the light, or the SEG Fabric when all you need is a fresh printed face.

Where Do SEG Backlit Displays Work Best

SEG backlit displays work as trade-show backwalls, retail light boxes, lobby and reception features, restaurant menu walls, and event branding. The backlighting makes them read in busy, evenly lit halls where a flat graphic disappears, and the fabric packs down for travel between shows. Double-sided units suit aisles and hanging positions.

A backlit display earns its keep anywhere the room is bright and your graphic has to fight for a glance. On a trade-show floor it turns a booth wall into a glowing backdrop that pulls people across the aisle. In retail it works as a light box for a hero product or a seasonal campaign. Hotels and offices use them as lit lobby features, and restaurants run them as illuminated menu walls. Because the graphic is fabric, it rolls down small and travels light between events, and a fresh 6oz print snaps back into the same frame when the message changes. Set a double-sided unit in an open aisle and it sells from both directions at once.

See the Rest of Our Displays

SEG backlit displays are one stop in a much larger lineup, and you can scan the full print product range any time. If a lit popup, a plain SEG frame, or a replacement graphic would serve you better, the rest of the family is one tap away on the SEG Displays page. Each option shows its own starting price and links straight to its product page, so finding the right fit takes seconds.

Print Your SEG Backlit Display Today

At 4OVER4.COM, quality comes first, and it is backed by a satisfaction guarantee and 25+ years of printing since 1999. Whatever way you run it, single-sided or double, this SEG backlit display is built to glow on a busy floor and set up wrinkle-free show after show. Need it before a launch or an exhibition? Our Same-Day production keeps you covered. Print your SEG backlit display today.

How the Silicone Edge Seats Into the Frame

SEG stands for silicone edge graphic, and that edge is the whole mechanism. A 10mm silicone strip, the keder, is sewn around all four sides of the printed fabric, and the frame carries a matching groove. You feed one corner of the strip into the groove, work along each side pressing the silicone in with a thumb, and the fabric pulls drum tight as the last side goes home. Nothing clips, screws or clamps over the print, which is why the finished face shows no hardware and no ripples along the edges. Taking it down is the same in reverse, easing the strip out from a corner, so the graphic comes off without a tool and rolls down for travel. That is what lets one frame stay in the booth while the printed face changes between shows.

Ordering a Replacement Graphic for a Frame You Own

A frame outlasts the message on it, so the second order is usually fabric rather than a whole display. Two things decide whether a new face will fit. The first is the frame size, measured across the outside of the extrusion, since this product is built at the 10 ft SEG format and a graphic tensioned for one frame will not sit right in another. The second is the groove, because the 10mm silicone keder sewn onto our fabric has to match the channel yours is cut for. Measure both before you order. If the frame is not a 10 ft SEG, the SEG Displays range covers other frames and SEG Fabric covers a printed face on its own. Send artwork as a PDF, JPG or PNG, and take the free online proof on a reprint, since the file is usually the thing that changed.