Share on twitter
Share on linkedin
Share on facebook
Share on twitter
Share on linkedin
Share on facebook

The vinyl backdrops and banners are a popular choice for advertisements and photography. If not stored correctly, it can get creased. In such situations, the question is, can you iron vinyl? How to get creases out of vinyl backdrop?

Red Vinyl Banner

In the banners, the computer cut vinyl logos, and letters are usually used. It gets highlighted when printed on the bright color nylon vinyl cloth. Vinyl is indeed an economical, light-weight, easy to manufacture material, and available in perky and non-fading shades. The primary problem for PVC or vinyl is that it gets wrinkled very quickly while shipping, storage, or transportation. Learn the reasons for the popularity of vinyl and how to get wrinkles out of plastic instantly.

Reasons for the Popularity of the Vinyl Material

  • Weather and Water-Proof

The outdoor vinyl banners are weather-proof and water-proof. It is resistant to water and harsh weather. The quality of the vinyl differs so you must determine the precise conditions for which you need the PVC vinyl plastic.

4Over4.com is one of the leading online providers for vinyl banner printing. The larger format banners need high-quality printing, and we offer just what you require. While transportation it may get creased but there are ways to remove wrinkles from vinyl.

  • Protection from Sun

In the sunny and bright areas, the vinyl fabrics are highly recommended. Even extended exposure does not affect much when it comes to vinyl material. The vinyl printed banners remain exactly the same even after long exposure to the sunlight. Whether it is ironing vinyl to get wrinkles out or other heat press or sunlight, color or print on vinyl is rarely affected.

  • Safe Material

The vinyl is a non-toxic material which makes it a safe and valuable resource over the years. This plastic is thoroughly researched and tested. The vinyl matches all the international standards of health and safety for all kinds of applications and products that it is used for.

  • Wear and Tear Resistant

The vinyl material is highly worn and tear-resistant. It is often used in the restaurant as a vinyl table cloth is quite common. You can remove the tablecloth easily for cleaning and sanitizing.

Vinyl Banner

The vinyl tablecloth is also resistant to stains, and flames and doesn’t get damaged or scratched easily. It is a durable material that can be stored and used for the long-term.

Often improper storage results in wrinkled vinyl banners. Do you know how to get wrinkles out of vinyl? Can you iron vinyl?

Can You Iron Vinyl?

It is possible to remove wrinkles from vinyl when creased due to improper storage or shipping. Here are the ways that you may follow to remove wrinkles-

Can You Iron Vinyl with Steamer

To get rid of the lines from vinyl, use a handheld steam iron. Firstly, sprinkle clean water to damp cloth. Then, hold the steamer nozzle at a distance of 1 to ½ inches from the vinyl banner.

Keep moving it on the entire, wrinkled area and you can see the warmth has relaxed the wrinkles. To protect the adhesive vinyl from breaking, use a Teflon sheet on the printed area and then steam the wrinkled banner. You may also apply the steam at the rear side of the banner.

Spritzing Vinyl Banner

For spritzing the creased printed vinyl banner, hang and clamp the banner to stretch it completely. It is essential to damp cloth using a spray bottle filled with water. Spritz the vinyl banner from both sides very lightly.

As the vinyl dries up, it tightens and stretches deleting the creases completely. You may also use the custom sizes banner stretching frames to hold the vinyl.

Natural Sunlight to Remove Wrinkles from Vinyl

If you are using an old vinyl banner, clean the dusty banner thoroughly. For soiled banners, use soap and water to give it a gentle wash and for dusty banners, wipe off the excess dirt. Never use any kind of harsh soaps and detergents to wash the vinyl. Place the vinyl outside in the sun and let it dry naturally to remove the wrinkles.

Can You Iron Vinyl Using HairDryer

You may warm the vinyl banner surface with a hair dryer to get rid of the wrinkles from the vinyl. Don’t ruin the high-quality printed design on the vinyl. Use the heat on the opposite side of the print to avoid spoiling the vinyl.

Using Steam Ironing for Vinyl

Place the banner on the plain floor surface for steam ironing. Keep doing it until the creases and wrinkles are gone entirely from the vinyl. Too much heat can melt the vinyl so ensure to put the steam iron at its lowest heat setting.

Can You Iron Vinyl Printed by 4Over4 and Use for a Long-Term

Custom Vinyl Banner

For a versatile, long-lasting, and dynamic banner, 4Over4 is the best online destination. Our step and repeat banner, fabric and mesh banners are great tools for creating a solid first impression. The wrinkled and imperfect display of your vinyl banner can disrupt your brand message and the purpose of advertising. You may come off as unprofessional if the banner is not perfect and in pristine condition.

Moreover, lesser use of advertising assets can increase your overall cost. Get your vinyl banner printed from a range of options and prints available with 4Over4.com.

Our team of experts can assure durable, perfectly printed, and long-lasting banners. It can be used again and again by ironing when wrinkled. We offer high-quality at reasonable prices for all our marketing materials and products.

Related articles

Branding

Custom Printed Boxes – Customize and Improve Your Sales

Are you looking toward enhancing your company brand and sales? Every business wants their brand to flourish and reach...
Brochures and Catalogs

Learn the Benefits and Uses of Printing Promotional Flyers

Every business has a brand message attached to it. It is associated with a vision, a mission, a value...

Leave a Reply

Your email address will not be published. Required fields are marked *

Be the first to know. Get Exclusive News and Savings!