Re-Election Campaign Sticker Templates
Re-elect stickers turn the signs you already own into the signs you need this cycle. Overlay an existing yard sign with a die-cut RE-ELECT panel, or hand out round badges and bumper strips that carry the name across the district, all printed on outdoor vinyl from a free template.
Re-elect stickers are die-cut vinyl overlays that update a campaign sign instead of replacing it. Cover the old name band with a RE-ELECT panel, badge your canvassing gear, or wrap a full board for a refresh. 4OVER4 prints each one on outdoor-grade vinyl with a free online proof, trusted by 150,000+ businesses and 10,000+ reviews.
The overview
Reuse the sign, refresh the message
Most campaigns print signs once and then run into the same wall the next cycle: a warehouse full of good boards that say the wrong thing. Re-elect stickers solve that. They are die-cut adhesive panels, printed on outdoor vinyl, that update an existing sign in place. Cover the old name band with RE-ELECT, change a year, or reskin the whole panel, and a stack of leftovers becomes fresh inventory.
The format follows the job. A premium campaign sticker overlays a yard sign or rides a bumper on tougher vinyl, a standard campaign sticker covers everyday handouts and gear on a budget, and a roll of campaign stickers feeds a whole field team from one order. When a board is too far gone to reuse, a new campaign yard sign picks up where the overlay leaves off.
You do not have to start from a blank page. Open a free layout or the Online Designer, drop in your name and district, and a free proof confirms the die-cut before anything prints. Prefer to browse first? Grab a free design template or price the range across every sticker option. With 25+ years of print behind it, 4OVER4 keeps the color and the cut consistent from primary to election day.
The templates
Four re-elect sticker formats to start from
Every campaign surface wants a different shape. Overlay stickers cover an existing sign panel, round badges ride canvassing gear, bumper strips travel the district, and full wraps reskin a board end to end. Pick the format that fits where the sticker will live, then drop your name into a template. Need a shape or size that is not standard? A custom project handles it.
RE-ELECT Overlay Stickers
A die-cut adhesive panel sized to cover the old messaging on an existing yard sign, so a first-run sign reads as a re-election sign in seconds.
Round Campaign Badges
Circle stickers for water bottles, clipboards, laptops, and canvassing kits that keep the name in a supporter’s hand all season long.
Bumper Strip Stickers
The classic long-format sticker that turns every volunteer’s car into a moving billboard across the whole district.
Full Sign Wraps
A full-panel sticker that reskins a corrugated or aluminum sign end to end when you want a complete refresh, not just an overlay.
How to size overlays
Match the sticker to the sign
The trick with an overlay is sizing it to the printed area, not the whole board. Measure the name band you want to cover, add a small margin, and set the artboard to that finished size with a 0.125 inch bleed. Here is where each common format lands.
18" x 24" yard signs
Overlay 16x10The most common lawn sign. A 16" x 10" or full-panel overlay sticker covers the old name band and drops RE-ELECT straight over it.
24" x 18" corrugated signs
Overlay 20x12Wider single-sided panels take a landscape overlay. Size the sticker to the printed area, not the full board, so the edges stay clean.
Water bottles and clipboards
3" circleA 3" circle badge sticks to canvassing gear and giveaways without curling. It reads at arm’s length and survives a wash.
Volunteer vehicles
Bumper 3x11A 3" x 11" or 4" x 15" bumper strip fits standard bumpers and rear windows and holds up through a full season of weather.
Full sign reskin
Full panelWhen the whole board needs new art, order the sticker at the exact panel size with a 0.125" bleed so it wraps corner to corner.
| Sticker size | Fits | Best use |
|---|---|---|
| 3" circle | Water bottles, clipboards, laptops, name tags | Volunteer kits and giveaways |
| 16" x 10" overlay | 18" x 24" and 24" x 18" yard signs | Covering the name band on a reused sign |
| Full-panel overlay | The full printed area of a corrugated sign | A complete re-election reskin |
| 3" x 11" bumper strip | Car bumpers and rear windows | Mobile visibility across the district |
| 4" x 15" bumper strip | Trucks, tailgates, wide bumpers | Bigger vehicles and rally handouts |
The lineup
Campaign stickers and signs worth printing at 4OVER4
Here are the products behind a re-election refresh, with live pricing pulled straight from the configurator. Start with a sticker to reuse what you have, add new boards where you need them, and keep the whole set consistent. For every shape and finish, browse the full stickers category.
Specs & price
Stocks, options, and live pricing
These are the real configurator specs and prices behind the most-ordered campaign stickers, from standard adhesive to premium outdoor vinyl. Every option below pulls straight from the live product configurator.
| Quantity | Price Per Unit | Total |
|---|---|---|
| 25 | 95.5¢ | $23.88 |
| 50 | 72.9¢ | $36.44 |
| 100 | 42.7¢ | $42.72 |
| 150 | 32.7¢ | $49.01 |
| 200 | 27.6¢ | $55.29 |
| 250 | 24.6¢ | $61.57 |
Side by side
Popular campaign stickers, compared
Line up the most-ordered stickers on price, turnaround, and rating so the trade-offs are clear before you commit. Weigh a budget standard sticker against a premium outdoor-vinyl overlay at a glance.
 Standard Stickers |  Premium Stickers |  Roll Sticker |  Bumper Stickers |  Embossed Stickers |  PVC Stickers |  Black Friday Stickers | |
|---|---|---|---|---|---|---|---|
| Min price | $23.88 | $29.16 | $322.98 | $38.44 | $322.98 | $25.00 | $23.88 |
| Paper / stock | Standard Uncoated Label | Uncoated Label | White Gloss (Indoor) | White Vinyl Permanent | White Gloss (Indoor) | Uncoated Label | Uncoated Label |
| Finish | - | - | - | UV Coating | - | - | - |
| Size | .5" Circle | 3" x 5" | 1" x 1" | 2" x 5" | 1" x 1" | 2" x 3.5" | 2" x 3.5" |
| Default qty | 25 | 25 | 100 | 25 | 100 | 25 | 25 |
| Turnaround | 3 business days | 3 business days | 6 business days | 5 business days | 6 business days | 3 business days | 3 business days |
| Rating | |||||||
| View & customize | View & customize | View & customize | View & customize | View & customize | View & customize | View & customize |
At a glance
Starting prices and best fit
A quick scan of the campaign products, the starting price for each, and the job each one fits best, so you can shortlist before you open the configurator.
| Product | Starting price | Best for |
|---|---|---|
| Standard Campaign Stickers | $23.88 | Everyday overlays and handouts on a budget |
| Premium Campaign Stickers | $29.16 | Outdoor-grade vinyl for signs and vehicles |
| Campaign Yard Signs | $25 | New boards when a sign is past overlaying |
| Bumper Stickers | $38.44 | Mobile visibility across the district |
| Roll Campaign Stickers | $322.98 | High-volume runs priced for the whole field team |
Where they work
Where re-elect stickers earn their keep
A campaign sticker is not one thing. The same outdoor vinyl covers a leftover yard sign, badges a water bottle, and rides a bumper across three counties. That range is what makes stickers the cheapest way to keep a name in front of voters all the way to the polls.
Reusing last cycle’s signs
You already paid for the yard signs once. An overlay sticker updates the name band or the date and puts the whole stack back on lawns for a fraction of a reprint.
Door-to-door canvassing
Round badges and small die-cuts drop into every canvassing packet, so supporters leave a sticker behind at the door along with the literature.
Cars and caravans
Bumper strips ride the district on volunteer cars and stay legible from the lane behind, which is exactly where a re-election name needs to land.
Rallies and events
A tray of stickers at the door turns every attendee into a walking endorsement before they even reach the parking lot.
Field office and HQ
Full-panel stickers reskin window signs, sandwich boards, and check-in tables so the office matches the current campaign look.
Poll-adjacent visibility
Weatherproof vinyl holds color through a long election-day setup, so signage and handouts still read sharp when turnout peaks.
Wally re-elects your old signs
One overlay, and last cycle is this cycle
Do not reprint a warehouse of signs. Peel a RE-ELECT overlay, line it up over the old name, and press. The sticker is outdoor vinyl, so it rides out the season on lawns and bumpers alike. Start from a free template, drop in your name and district, and let the free proof confirm the cut before it runs.
Order re-elect campaign stickers →We had 400 signs left from the primary. A batch of RE-ELECT overlays let us put every one back out for the general at a fraction of a reprint. The vinyl matched the original panel color perfectly.
How to make yours
Design a re-elect overlay that reads from the street
A sticker is only as good as the two seconds a voter gives it from a moving car. Here is how to make a re-elect overlay that covers the old sign cleanly and lands the name at a glance.
Lead with the word RE-ELECT
The entire point of the sticker is the prefix. Put RE-ELECT and the name in the largest, boldest type on the design, and let everything else fall back so the message reads from a passing car.
Match the sign you are covering
If you are overlaying an existing sign, sample its color and font so the sticker looks like it was always part of the design. A mismatched patch reads as a sticker, a matched one reads as a fresh sign.
Hold strong contrast
Dark type on a light field, or the reverse, survives glare and distance. Thin type or low-contrast color disappears on a lawn at noon, so keep the value gap wide.
Build to size with real bleed
Set the artboard to the finished sticker size and add a 0.125" bleed so the die-cut never leaves a white sliver. The <a href="/benefit/online-designer">Online Designer</a> flags trim and resolution issues before you order.
Keep required disclaimers legible
Political stickers usually carry a paid-for-by line. Give it a real, readable size in a corner rather than shrinking it to nothing, so the piece stays compliant and clean.
The online proof caught a spacing issue on our overlay before it printed. Easy fix, and the final die-cut lined up exactly over the old name on our signs.
Start fast
Free templates and a running start
Need a head start? Open a blank campaign-sticker template, drop in your name and district, and you will see a free proof before anything prints. Every layout is built to the correct size with bleed already set.
Myth vs fact
What to know before you order
Four myths about reusing signs and printing campaign stickers, set straight, so you order the right piece the first time.
A campaign sign is single-use, so leftovers just get tossed.
An overlay sticker updates the name band or the year on an existing sign, so last cycle’s inventory goes right back onto lawns without a full reprint.
Any indoor sticker works fine outdoors on a sign.
Campaign stickers face sun, rain, and sprinklers for weeks. 4OVER4 prints them on outdoor-grade adhesive vinyl built to resist fading and lifting through the season.
You need a designer to make a re-elect overlay.
Start from a free sticker template or the Online Designer, drop in your name and district, and a free proof shows you the exact die-cut before anything prints.
Bumper stickers and yard-sign overlays are the same product.
A bumper strip is a long, narrow sticker built for a curved painted surface, while an overlay is die-cut to the flat printed area of a specific sign. Sizing and shape differ.
By the numbers
Why campaigns print stickers with 4OVER4
Real results
What campaigns say about our stickers
We had 400 signs left from the primary. A batch of RE-ELECT overlays let us put every one back out for the general at a fraction of a reprint. The vinyl matched the original panel color perfectly.
Ordered round badges and bumper strips for our field team. They held up through a rainy October and still looked sharp on election day. Turnaround beat the local shop by three days.
The online proof caught a spacing issue on our overlay before it printed. Easy fix, and the final die-cut lined up exactly over the old name on our signs.
Bought bumper stickers for the whole caravan. Bright, weatherproof, and they peeled clean off the roll. Reordered twice during the run.
We reskinned our HQ window signs with full-panel stickers so everything matched the new look. Fast, and the color was dead on our brand guide.
Great value on a tight budget. Reusing our old boards with overlays saved us enough to buy another round of door literature.
Upside & trade-offs
What an overlay does well, and what to weigh
The honest pros and cons of reusing signs with stickers, so you know exactly where an overlay shines and where a new board is the smarter buy.
Where overlays win
- Reuses yard signs you already own instead of paying to reprint the whole board
- Prints on outdoor adhesive vinyl that holds color through a full campaign season
- Comes in overlay, round, bumper, and full-panel formats for every campaign surface
- Starts from free templates and a free online proof, so the layout is right before it runs
What to weigh first
- A weathered or peeling old sign needs a clean, dry surface for the overlay to stick well
- Overlays that do not match the original sign color can read as a patch up close
- Roll orders are priced for volume, so a small run is better as sheets or singles
- A full-panel reskin costs more than a small overlay, though still less than new signs
The re-election playbook
Start with the sign, then choose the sticker
Three decisions shape a re-election refresh: whether a sign is sound enough to overlay, which format fits each surface, and a design that reads from the street. Here is the whole picture, with every choice that goes into a sticker that reuses what you already own.
Inspect the boards first. A sign that is flat, clean, and still bright is a perfect candidate for an overlay, and a premium campaign sticker on outdoor vinyl will sit tight over the old name band. A board that is cracked, faded, or peeling is past overlaying, so route those to a fresh campaign yard sign instead. Sorting the pile this way tells you exactly how many stickers to order and how many new signs to add.
Then match the format to the surface. Overlays cover flat sign panels, round badges from a roll of campaign stickers ride gear and giveaways, and bumper stickers travel the district on volunteer cars. If you want to plan stickers as a real channel rather than an afterthought, the sticker marketing campaign guide lays out the whole rollout.
Stocks and materials
Materials that survive a campaign season
Campaign stickers live outdoors under sun, rain, and sprinklers for weeks, so the material matters more than it does for an indoor label. 4OVER4 prints them on durable adhesive vinyl built to resist fading and lifting, which is why the same stock covers yard signs, bumpers, and windows. For a deeper look at what each material handles, the guide on choosing the right sticker material walks through the trade-offs, and the sticker pricing guide covers what drives the cost. If you are comparing adhesive products, see stickers versus labels versus decals.
Read from across the lawn
Design that lands the name in two seconds
Voters take in a sign from a moving car, so the design has to do its whole job in a glance. Lead with RE-ELECT and the name in the boldest type, hold high contrast, and keep the rest of the sticker quiet. If you are overlaying an existing board, sample its color and font so the patch reads as part of the original sign. Build the artboard at the finished sticker size with a 0.125 inch bleed, and the Online Designer will flag trim and resolution problems before you order. For a sanity check on dimensions, the sticker sizes chart matches every common size to its best use.
A sticker rarely runs alone. The same file discipline that makes an overlay read clean carries across the whole campaign kit, so it pairs naturally with political postcards for mailers and full yard signs where a board is past reusing. Keep the name, color, and typeface consistent across signs, stickers, and mail, and the whole program reads as one campaign rather than a pile of separate orders.
Trusted by
Print campaigns rely on
Explore more
Related stickers, signs, and campaign print
Category Shop all stickers Every sticker shape, material, and finish with live pricing. 
Showcase Political postcard templates Mailer layouts that pair with your sign and sticker look. 
Guide Plan a sticker campaign How to roll out stickers as a real marketing channel. 
Article Vintage campaign buttons A look back at the pins and pinbacks that shaped elections. 
Compare Stickers vs labels vs decals Which adhesive product fits which campaign job. 
Alternative 4OVER4 vs StickerYou How the two compare on custom sticker printing. 
Collection Political printing collection Signs, stickers, mailers, and more for a campaign. Hub Sticker and label hub Shapes, materials, and finishes in one place. 
Benefit Free design templates Ready-to-edit layouts that save hours before print. Questions, answered
Common questions about re-elect campaign stickers
Sizing, materials, reusing signs, and file prep, straight answers. For more, browse the full 4OVER4 FAQ library or the printing terms glossary.
What are re-elect stickers for campaign signs?
They are die-cut adhesive stickers designed to update an existing campaign sign for a re-election run. Instead of reprinting hundreds of yard signs, you apply an overlay sticker that adds RE-ELECT over the old name band, or reskins the panel entirely. 4OVER4 prints them on outdoor-grade vinyl so they hold up on lawns and vehicles through a full season.
What size overlay sticker fits a standard yard sign?
Most lawn signs are 18" x 24" or 24" x 18". A 16" x 10" overlay covers the name band on either, and a full-panel sticker sized to the printed area gives a complete reskin. Design at the finished sticker size with a 0.125" bleed so the die-cut never leaves a white edge. For gear and giveaways, a 3" circle badge is the go-to size.
Will campaign stickers survive being outdoors all season?
Yes. 4OVER4 prints campaign and political stickers on durable outdoor adhesive vinyl built to resist sun, rain, and sprinklers. That is what separates them from an indoor label. For the longest life, apply to a clean, dry, smooth surface and press out any air as you go.
Can I reuse last cycle’s signs with an overlay?
That is exactly what these are for. If your existing signs are still in good shape, an overlay sticker updates the name or the year and puts the whole stack back to work. If a board is faded, cracked, or peeling, a new campaign yard sign is the better call, since an overlay needs a sound surface underneath.
Do I need a designer, or can I start from a template?
You can start from a free template or build from scratch in the Online Designer, then drop in your name and district. A free online proof shows you the exact die-cut and layout before anything prints. If you want a fully custom shape or size, a custom project covers it.
What file format should I send for a sticker order?
Send a high-resolution PDF in CMYK with fonts outlined and images embedded, built to the finished sticker size with a 0.125" bleed. If you are ordering other pieces for the campaign, see the political postcard templates for mailers or browse all sticker options for shapes and finishes.
Get Started
Ready to re-elect your signs?
Pick a format, drop your name into a free template, and we will print it sharp on outdoor vinyl with a free online proof, ready to overlay the signs you already own.
Legal Disclaimer
Gold Standard guarantees apply to all standard orders placed through 4over4.com. Price match requires verifiable proof of a competitor's published price for an equivalent product with matching specifications and turnaround time. Satisfaction guarantee covers manufacturing defects and print quality issues. Contact support with order number and documentation. On-time delivery rate based on tracked orders 1999 to 2026. Individual results may vary based on shipping carrier performance.
