Tobias Reed Production Knowledge Lead at 4OVER4.COM
Tobias is our voice for cutting, binding and large format, built from the knowledge of our production team, with over 20 years in printing.
Question
What bleed allowance should I add to my design file for retractable banner stands?
Answer
Add 1/8 inch (0.125") of bleed on all four sides of your retractable banner design. That margin gives the finished graphic full edge-to-edge coverage once the file is trimmed and loaded into the stand, so no unprinted paper shows along the borders.
- Extend background colors and imagery a full 0.125" past the trim on the top, bottom, and both sides.
- Remember the bottom few inches of most retractable graphics roll into the base cassette, so keep logos and key text well above that zone.
- Keep essential copy at least 0.5" inside the trim line so it stays clear of the edges and the retract mechanism.
| Element | Guideline |
|---|---|
| Bleed | 0.125" on all 4 sides |
| Safe zone for text/logos | 0.5" inside trim, higher than the base area |
| Resolution | Design at the final print size |
Ready to order?
Get your retractable banner stands printed at 4OVER4
Explore all Banner Stands at 4OVER4.
